With high flow temperatures of up to 73 °C, the Vitocal 350‑G Pro series meets the requirements for hygienic DHW heating. The special temperature maintaining facility guarantees hot inlet temperatures at all times, even during the loading cycle.
Large heat pump
Brine/water heat pump with the option of water/water operation with intermediate brine circuit.
Rated heating output for brine/water operation
27.3 to 197.9 kW
Rated heating output for water/water operation
37.6 to 274.2 kW
Hygienic DHW heating
Thanks to high flow temperatures of up to 73 °C
Economical partial load characteristics
Due to the use of two or three compressors with an equal rating
Intuitive operation of the control unit
Via touchscreen and schematic diagrams
Remote monitoring and communication
Through numerous data communication options
Brine/water heat pump
Two or three-stage
Low running costs thanks to high coefficients of performance
COP (coefficient of performance) to EN 14511: up to 4.2 (B0/W35)
Low noise and low vibrations
Due to sound-optimised appliance design
Electronic soft starter system
For reduced starting current and less power drawn from the mains
Conventional heating/cooling function
With heating water/coolant buffer cylinder
PLC-based Vitotronic
With Modbus and BACnet communication interface (optional)
Vitocal 350 G Pro –– delivers flow temperatures up to 73 °C
The frame design makes the powerful and efficient Vitocal 350-G Pro brine/water heat pump easier to handle and install. The sound insulated casing (supplied separately) offers a snug fit and reduces the transport weight by around 200 kilograms. The unit is ideal for modernising heating systems with high flow temperatures.
Depending on the output, two or three compressors are integrated into the refrigerant circuit by way of a compound connection. This guarantees high levels of efficiency, even in partial load operation. The utmost reliability is achieved through the use of electronic injection valves, which are self-closing at zero volt to ensure maximum safety if there is a power failure, for example. Additionally, the hermetically sealed design with fewer threaded connections, and the absence of safety valves in the refrigerant circuit, guarantee tightness and a long service life.
For optimum control of the system and refrigerant circuit, the Vitocal 350-G Pro features a PLC-based Vitotronic control unit. The large graphic touchscreen enables intuitive operation. Its full colour mode highlights the different way that functions and operation are displayed.
The control unit recognises numerous data communication options. From a simple analogue modem to a LAN-based system: Modbus technology and BACnet (both optional) can be used to enable the system to be accessed via the internet for remote maintenance and communication purposes.
As is the case for all heat pumps, the compressors generate noise in the 50 to 60 Hertz range. Due to the very high quality construction of the appliance frame and sound insulation, it has been possible to compensate for any noise within the casing. Vibrations on the base support are barely perceptible, as the 3D anti-vibration design is specifically constructed to dissipate vibrations. The sound power level of 65 dB(A) for the 197 kilowatt heat pump is very good for this market segment.
The electrical equipment is already fully integrated inside the heat pump. The contactors for the circulation pumps are prefitted and easily accessible. In addition, the heat pump offers a wide range of control extensions, which are directly integrated at the factory.
Product details
- Rated heating output (kW), operating point B0/W35 (to EN 14511)
-
All performance data can be found in the brochure on large heat pumps.
- Coefficient of performance ε (COP) B0/W35
-
All performance data can be found in the brochure on large heat pumps.
- Application area
-
Residential buildings, commercial enterprises, local authority premises, modernisation projects, new build
- Operation
-
Vitotronic 200 PLC 2.0 control unit with large colour touchscreen
- Product cross-section
-